Sony MFM-HT205 Manual Del Usuario página 11

x Connecting video equipment using the
COMPONENT jacks
If you intend to connect video equipment that has component
video output jacks, such as a DVD player, follow the instructions
below.
Using a video signal cable (not supplied) and an audio
cord (not supplied), connect the video equipment to the
display's COMPONENT jacks.
rear of the display
audio-L
(white)
audio-R
(red)
DVD player
audio cord (not
supplied)
If you intend to connect video equipment that has a Scart
connector, such as a DVD player, follow the instructions below.
Using a Scart adapter cable (not supplied) and an audio
cord (not supplied), connect the video equipment to the
display's COMPONENT jacks.
rear of the display
audio-L
(white)
audio-R
(red)
DVD player
audio cord (not
supplied)
x Connecting video equipment using the
If you intend to connect video equipment that has analog RGB/
composite video output jacks, such as a VCR, follow the
instructions below.
Using a Scart adapter cable (not supplied), connect the
video equipment to the display's VIDEO 1 (Scart) jack.
Y
P
B
P
R
component
video cable
(not supplied)
If you intend to connect video equipment that has a Scart
connector, such as a VCR, follow the instructions below.
Using a Scart adapter cable (not supplied), connect the
video equipment to the display's VIDEO 1 (Scart) jack.
Y
P
B
P
R
Scart
adapter cable
(not supplied)
VCR
By this connection, you can view both analog RGB video signals
and composite video signals output from video equipment. Also,
you can output TV signals and record the signals on the video
equipment connected to the display.
11
VIDEO 1 (Scart) jack
rear of the display
VCR
audio-R (red)
audio-L (white)
video (yellow)
rear of the display
GB
Scart adapter cable
(not supplied)
Scart
adapter
cable
(not
supplied)