Sony MFM-HT205 Manual Del Usuario página 8

Remote control
8
9
0
PC1 PC2
TV
qa
1
4
7
qs
2
qd
DISPLAY
A 1 (power) switch (page 13)
Press to turn the display on or off.
B Input select buttons
PC 1 (page 10): Press to select a signal input through the
PC 1 connectors (DVI-D) on the rear.
In the TeleText mode, press to select red
option.
PC 2 (page 10): Press to select a signal input through the
PC 2 connectors (HD15) on the rear.
In the TeleText mode, press to select
green option.
COMPONENT (page 11):
Press to select a signal input through the
COMPONENT jacks (Y/P
Component) on the rear.
In the TeleText mode, press to select
yellow option.
1
1
COMPONENT VIDEO1/2 2
3
MENU
4
OK
2 3
5
5 6
8 9
6
0
ENT
PROG
7
/P
B R
VIDEO 1/2 (page 11):
Press to select a signal input through the
VIDEO 1 (Scart) jack (analog RGB/
composite video) on the rear and the
VIDEO 2 jacks (composite/S video) on
the side of the display.
In the TeleText mode, press to select blue
option.
TV (page 15): Press to select the TV input.
C Feature buttons
(PIP/PAP)/
Press repeatedly to step through the "PIP"
or "PAP"settings.
In the TeleText mode, press to reveal
concealed information. Press it again to
conceal the information.
(Zoom)/ (page hold) (page 25):
Press repeatedly to step through the
"Zoom" settings.
In the TeleText mode, press to freeze a
sub page which follows on automatically.
Press it again to cancel the freeze.
(TeleText) (page 33):
Press to turn on or off the TeleText mode.
D MENU button (page 18)
Press to turn the menu screen on and off.
E 0-9 buttons (page 15)
Use these buttons to input numbers.
F ENT (enter) button (page 15)
Press to confirm the numbers you input using the 0-9 buttons.
G PROG +/– (
(page advance)/
buttons (page 15)
Press to change the TV channel.
In the TeleText mode, press to access the next or preceding
page.
H
(sleep) button (page 33)
Press repeatedly to set the display to turn off automatically
after a specified period of time. If you use this function and
set the Sleep timer, the 1 (power) indicator lights up in red.
I
(display) button (page 17)
Press once to display the current channel number or the
current input. They will remain until you press this button
again.
J
(muting) button (page 17)
Press to turn the sound off. Press again or press the 2 +
button to restore the sound.
K M/m and OK buttons (page 18)
Use the M/m buttons to select menu items and make
adjustments.
Press the OK button to activate the selected menu item and
adjustments made using the M/m buttons.
L
(jump) button (page 17)
Press to switch the TV channel between the current one and
the last one that was selected using the 0-9 buttons.
M 2 +/– buttons (page 31)
Press to adjust the sound volume.
8
(reveal/conceal) (page 27):
(page reverse))