Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
This operation is only necessary if the operator opens the leaf instead of closing it when making a reset (rS).
1 Press ENTER, with
the display showing
rSXX
(rSº
 8,
rSº
â 8,
rS8º
@ ,
rS8º
? , etc).
ESC
ENTER
P274ZZ
Total opening radio code programming P1 (with RSD receiver only, C801)
If a receiver other than RSD
is
used,
see
the
corresponding instructions.
Select the option C801
(RSD
receiver)
before
starting programming.
ESC
ENTER
P274D
Pedestrian opening radio code programming, P2 (with RSD receiver only, C801)
This procedure is the same as for total opening, but using parameter P2 instead of P1.
1 Press ENTER, with the
display showing rSXX
(rSº
 8,
rSº
â 8,
rS8º
@ ,
rS8º
? , etc).
ESC
ENTER
P274P
11 Start closing by pressing the
transmitter, ST1 or ^.
12 Start slowdown by pressing the
transmitter, ST1 or ^.
13 Wait for it to come to a stop at the
end of travel.
Pedestrian opening is programmed using the parameter F3 (see "Complete programming chart").
Turning direction change and check (C1)
ESC
ENTER
P274H
ESC
ESC
ENTER
P274X
1 Press ENTER, with the
display showing rSXX
(rSº
 8,
rSº
â 8,
rS8º
rS8º
? , etc).
Open/close programming (P3)
ESC
ENTER
P274B
Before programming, carry out
an
opening
and
closing
movement at normal and slow
speed in order to detect the
corresponding
currents
(parameter A6XY).
Once programming is complete,
the parameter A6XY is shown,
indicating
currents for normal speed (X)
and fast speed (Y). This can be
modified if required.
ESC
ENTER
P274I
ESC
ENTER
P274W
@ ,
ESC
ESC
ESC
ENTER
P274M
ESC
ENTER
14
the
suggested
ESC
ENTER
P274J
ESC
ENTER
P274V
ENTER
ESC
P274B
ESC
ENTER
P274F
ESC
ENTER
P274N
8 Start
opening
transmitter, ST1 or ^.
9 Start
slowdown
transmitter, ST1 or ^.
P274Q
10 Wait for it to come to a stop at the end
of travel.
15
ESC
ENTER
P274S
ESC
ENTER
P274K
ESC
ENTER
P274Y
ENTER
P274C
ENTER
P274G
ESC
ENTER
P274O
by
pressing
the
by
pressing
the
ESC
ENTER
P274U
13
Publicidad
Tabla de contenido
