Ratings And Specifications; Regulatory Information - DSC IMPASSA TL8055LT Manual De Instalación

Menu
Installer
Programming
1
----Test PIR
--Communication Test
1
An interactive Alarm.com account with an image sensor service plan is required for image capabilities and
features.
2
Refer to the Home Automation installation instructions and guides on the Alarm.com Dealer Site for more
information on Z-Wave enrollment and troubleshooting.

Ratings and specifications

Table 1-8 Rating and specifications
Compatibility
Input voltage
Standby current
Alarm current
Operating temperature 14 to 131°F (-10 to 55° C)
Storage temperature
Max. relative humidity 90% non-condensing
Cellular network
Dimensions

Regulatory information

Note: For UL/ULC applications, the temperature rating is 0-49° C and the maximum relative humidity rating
is 85% RH.
Changes or modifications not expressly approved by DSC can void the user's authority to operate the equip-
ment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turn-
ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the fol-
lowing measures:
Reorient or relocate the receiving antenna.
l
Increase the separation between the equipment and receiver.
l
Connect the equipment in to an outlet on a circuit different from that which the receiver is connected
l
Consult the dealer or an experienced radio/TV technician for help.
l
This equipment complies with FCC and Industry standards RF radiation exposure limits set forth for an uncon-
trolled environment. This equipment should be installed and operated with a minimum distance of 20 cen-
timeters between the radiator and your body.
Under Industry Canada regulations, this radio transmitter only operates using an antenna of a type and max-
imum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference
to others, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une
antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le
Description
Press [*][8] [Installer Code] [851] to enter Interactive Services menu
See Installer Programming section
See Installer Programming section
IMPASSA panels with software versions 1.3 and later
4 V (supplied by compatible control panel)
DC
150 mA
400 mA
-30 to 140°F (-34 to 60° C)
LTE
(H x W) 3.25 x 4.25 in. (8.23 x 10.80 cm)
- 15 -
Alarm.com LTE