Warning: Installer Please Read Carefully; Note To Installers; Safety Instructions; System Failures - DSC IMPASSA TL8055LT Manual De Instalación

Warning: installer please read
carefully

Note to installers

The warnings on this page contain vital information.
As the only individual in contact with system users, it
is the installer's responsibility to bring each item in
this warning to the attention of all users of this sys-
tem.

Safety instructions

This equipment must be installed by Skilled Persons
only (a skilled person is defined as a person having
the appropriate technical training and experience
necessary to be aware of hazards to which that per-
son may be exposed in performing a task and of meas-
ures to minimize the risks to that person or other
persons). It must be installed and used within a non-
hazardous, indoor environment only (pollution degree
max 2, over voltages category II).
The installer is responsible for instructing the system
user in regards to electrical safety precautions when
using a system which includes this equipment and also
in regards to each of the following:
Do not attempt to service this product. There are
l
no user serviceable parts inside.
If servicing is required, it shall be referred to
l
skilled persons only.
Using adequate mounting means (for example plastic/-
metal anchors), secure the transceiver to the building
structure.
Internal wiring must be routed in a manner that pre-
vents:
Excessive strain on wire and on terminal con-
l
nections.
Loosening of terminal; connections.
l
Damage to conductor insulation.
l

System failures

This system has been carefully designed to be as
effective as possible. There are circumstances, how-
ever, involving fire, burglary, or other types of emer-
gencies where it may not provide protection. Any
alarm system of any type may be compromised delib-
erately or may fail to operate as expected for a
variety of reasons. Some, but not all, of the reasons
may be:

Access by intruders

Intruders may enter through an unprotected access
point, circumvent a sensing device, evade detection
by moving through an area of insufficient coverage,
disconnect a warning device, or interfere with or pre-
vent the proper operation of the system.

Component failure

Although every effort has been made to make this sys-
tem as reliable as possible, the system may fail to
function as intended due to the failure of a com-
ponent.
Compromise of radio frequency (wire-
less)
A device's signals may not reach the receiver under
all circumstances, which could include: metal objects
placed on or near the radio path, deliberate jamming
or other inadvertent radio signal interference.

Criminal knowledge

This system contains security features which were
known to be effective at the time of manufacture. It
is possible for persons with criminal intent to develop
techniques which reduce the effectiveness of these
features. It is important that your security system be
reviewed periodically to ensure that its features
remain effective and that it is updated or replaced if
it is found that it does not provide the protection
expected.

Failure of replaceable batteries

This system's wireless transmitters have been
designed to provide several years of battery life under
normal conditions. The expected battery life is a func-
tion of the device environment, usage, and type. Ambi-
ent conditions such as high humidity, high or low
temperatures, or large temperature fluctuations may
reduce the expected battery life. While each trans-
mitting device has a low battery monitor which iden-
tifies when the batteries need to be replaced, this
monitor may fail to operate as expected. Regular test-
ing and maintenance will keep the system in good
operating condition.
- 4 -