Publicidad
10
12
15
Hemmer foot
EN
Presser foot available as optional accessory.
For hems in fine or sheer fabrics.
Set the machine as illustrated.
Pattern selector on "
" or "
".
Set stitch length control between "2.5" - "4".
Turn the stitch width dial to "0". (model 15)
Neaten the edge of the fabric. At the
beginning of the hem, turn under the edge
twice by about 3 mm (1/8") and sew 4-5
stitches to secure. Pull the thread slightly
towards the back. Insert the needle into the
fabric, raise the presser foot and guide the
fold into the scroll on the foot. (1)
Gently pull the fabric edge towards you and
lower the presser foot. Begin sewing, guiding
the fabric into the scroll by holding it upright
and slightly to the left. (2)
Please note:
No "S" marking is shown on the stitch length
dial by model 10.
502020.75.25_021V4D0102_1012_IM_bernette 10 12 15_EN_ES_FR_PT
Publicidad
