3
© When "DELAY TIME"
is selected
With 51-channel
surround sound, ideally the distance
between
the listening
postion
and all the speakeEs
aside from the subwoofeE
should be the same
The
delay time
setting
can be used to make the sound
from
the d fferent
speakers
reach
the
listening
position at the same time
Use the • and Y cursor buttons
to select the sett ng
item, then press the ENTER button
• When
"DISTANCE"
is selected:
METERS (when the "4 cursor button is pressed):
The unit of distance is set to meters ("m")
FEET (when the _ cursor button
s pressed):
The unit of distance is set to feet ("ft")
• Whe_
"FRONT
Lch",
"FRONT
Rch",
"CENTER",
"SURROUND
Lch",
"SURROUND
Rch",
"SUBWOOFER"
is selected:
Use the
"4 and I_
cursor
buttons
to set the
d stance from the listening position
to the different
speakers
The distance
can be set within
the range of 0 to
60 feet (18 meters)
The maximum
difference
n speaker
distance for
which
adjustment
is possible
is 15 feet
(45
meters)
• When
"DEFAULT"
is selected:
When
"DEFAULT"
is selected
and the
ENTER
button
is pressed, all the items are restored to their
factory defaul[ settings
_-- When
digital
co_nections
are made
with
an AV
amplifier,
make
the
speaker
sett ngs on the AV
amplifier
For DVD audio discs, the disc's settings
are given
priority,
so the sound may not be produced
as set
with the above speaker mode setting
• -- Press
the
RETURN
button
to
return
to the
"SPEAKER SETUP" menu
Remote
contro; ur_
Remo_e _r_tlo!
unit
Remote
control
_n_t
3
"/2 When "DIGITAL
OUT" is selected:
NORMAL
(Factory default)
When
playing
DVDs recorded
in Dolby
Digital
or DTS,
bitstream
signals are output
from the digital audio output
terminals¸
When playing DVDs recorded
in linear PCM or
packed PCM, linear PCM signals are output¸
Select "NORMAL"
when making digital connections
to an
AV amplifier
with buik-in Dolby Digital and DTS decoder¸
PCM
When
playing
Dolby
Digital/DTS
bitstream
signals
or
DVDs recorded
in linear PCM or packed PCM, the signals
are converted
into 46 kHz/16-bit
PCM (2-channell
signals
and output
from the digital outputs¸
When
playing DVDs
recorded
in PCM, linear PCM signals are output¸
_" When "LPCM {441 kHz / 48 kHz}
rr
is selected:
OFF (Factory default}
When playing linear PCM or packed PCM DVDs that are not
copyr ght protected,
for 2-channel PCM audo signals _p to
96 kHz, linear PCM s gna}s are output as such wthout
being
converted from the digital outputs
(1762 kHz and 192 kHz
signals are converted to 882 kHz a_d 96 kHz, respectively)
PCM sig_als of 48 kHz/16 bits and lower are output, regardless
of whether they are copyright-protected or _ot
For DVDs co_tain ng mu t-cha_me
PCM sg_als, the d gital
sig_als are down-mixed for o_tput into two channels, front left
and right (Only the front left and right cha_ne}s are output for
sources for which down-mixing is proh bited )
When
playing copyr ght-protected
linear PCM or packed
PCM DVDSr in consideration
of copyrights,
no digtal
signals are output
for sources exceeding
48 kHz/16 bits
When playing such sources,
either set to "ON"
or make
analog connections
(See page 9)
ON
Linear PCM and packed PCM signals are converted
to 441
kHz or 48 kHz and output
(The PCM digtal
audio output
sgnals are co,wetted
to 48 kHz or ess n consideration
of
copyr ghts ) When
makng
dgtal
co_mections
to an AV
amplifier that is not compatible with 96 kHz/88 2 kNz signa}s,
set to "ON"
When
playing
DVDs
recorded
in linear PCM or packed
PCM and the unit is set to output
digilal and analog audio
signals
simultaneously,
the analog audio output
signals
are also converted
to 48 kHz or belowr so we recommend
sett ng to "OFF" and also making analog connections
/_} When "BASS ENHANCER
(2 CHANNEL)"
is selected:
OFF (Factory default}
No sou_d is produced from tl_e subvvoofer
ON
Sou_d is produced from the subwoofer
In this case, set the subwoofer
to "YES" at the speaker
sett ngs
Remote
cc_ltrol
unit
Remo_e contlo_ ul_i_
• --To exit the setup mode
Use the • cursor button to select "EXIT SETUP", then press the ENTER button
It is also possible to quit
by pressing the SETUP button on the remote control unit
18