Publicidad
3
16
Use the
• and • cursor
buttons
to select
the desired
setti_lg, then press the ENTER button
_1_ When "TV ASPECT"
is selected:
4:3 PS
Select this to play wide DVDs in the pan E_ sca_l mode
(with the sides of the picture cut off)
Discs for which
pan _ scan is not specified
are played in the letter box
mode
4:3 LB
Select
this to play wide
DVDs in the letter
box mode
(with black strips at the top and bottom)
WIDE (16:9) (Factory default)
Select this to play wide DVDs in the full-screen1 mode
_2_ When "TV TYPE" is selected:
NTSC
Select this when your TV's video format s NTSC
If NTSC is selected,
output format is fixed to NTSC
PAL
Select this when your TV's video format is PAL
If PAL is selected, output
format is fixed to PAL
MULTI (Factory default)
Select
this when
your TV is compatible
with
both the
NTSC and PAL formats
If yOU
play
the
disc
_ec©rded
NTSC
forf_]at
r sigr_al
ffor_
video
output
termi_lal
will
be switched
to NTSC is
selected,
output format
is fixed to NTSC
{3} When
"VIDEO OUT" is selected: (NOTES)
PROGRESSIVE
(Factory default)
Select
this when
using the DVD-3800
connected
to a
progressive
type TV
INTERLACED
Select this when
usi_lg the DVD-33SS connected
to an
interlace type TV
NOTES:
• For the compo_lent
output
only, t is possible to swdch
between
interlace image output
and proglessive
rnage
output
It s not possble
to specify
progressve
image
output for the Video output
connectors
or S-Video output
connector
• When
the progressive
mode is selected,
the interlaced
sound and picture may be slightly out of sync To use the
interlaced outpUtr set the setting to "INTERLACED"
_4}When "VIDEO MODE"
is selected:
VIDEO
This mode
is best suited
for playir_g discs
containing
video material
FILM
This mode
is best suited
for playing
discs
contai_ling
film
mater
al or video
material
recorded
with
the
progressive
scan method
AUTO (Factory default)
The set identifies
the type of matedal on the disc being
p]ayed
(film
or
video)
and
selects
the
mode
automatically
This
mode is suited
for playing
discs
containing
both film and video material
NOTE:
• If stripes of noise appear on the picture or the picture s
unclear
when
playing
a specific
DVD video
disc,
try
changing the video mode
Rerno_e contro;
u,_t
Re,y_c>_e_r_t_iunit
_5 When "SLACK LEVEL" s selected:
DARKER (Factory default)
Sets the video output
signal's black level to the standard
level¸
LIGHTER
Reduces the standard level of the video output
signal's
black level¸
Set this if the image on the TV is far too dark¸
(6When
"AV1 VIDEO OUT" is selected:
VIDEO (Factory default)
Composite
video
signals will
be output
from the AVl
SCART terminal¸
S-VIDEO
S video signals will be output¸
RGB
RGB signals will be output¸
3
_7 When "SQUEEZE MODE"
is selected:
"SQUEEZE
MODE"
- only effective
for progressve
output
OFF (Factory default)
Set this to display
4:3 video
signals
over
the entire
screen of a 16:9 TV
ON
Set this to display 4:3 video signals in the center of the
screen on a 16:9 TV
_8}When "PROGRESSIVE
MODE"
is selected:
MODE 1 (level detection
mode)
(Factory default)
This is a mode for high precision detection
of the source
type from the level of the video signals recorded on the
DVD
For DVDs on which the flag (identification
signal) data is
recorded
incorrectly,
the picture
quality
may decrease
when flag detection
is conducted¸
This mode is effective
in such cases¸
MODE 2 (flag detection
mode)
This is a mode for detecting
the source type from the
source flag lidentification
signal) recorded on the DVD
In dark scenes,
distinguishing
between
video
signals
and noise signals with level detection
is difficult
and the
picture quality may decrease¸
This mode is effective
in such cases¸
• --To exit the setup mode
Use the • cursor button to select "EXIT SETUP", then press the ENTER button
It is also possible to quit
by pressing the SETUP button on the remote control unit
Publicidad
