Print Settings - Gima ECG300G Manual De Uso

Bradycardia

13.11 Print Settings

In the main interface, select
Select the button【Default】, the print settings will back to the default.
In this interface, the automatic mode option can only be effective when select "auto" in 【Print
Mode】.
In print setting interface, press "Advanced" to enter advanced print setting interface.
Item
General Print Mode
setup
Lead Gain
Auto strip
The system will use the inputted value as a standard of judging bradycardia.
button to enter the following interface for print settings.:
Optional content
[Auto 3*4+1] /[Auto3*4]
/[Auto2*6+1] /[Auto2*6]/
[[Auto 4*3] /[Rhythm2]/
[Rhythm 3 ]/[Rhythm4]/
[Manual]
Smart/Current
3Sec/4Sec/5Sec/6Sec/8S
ec/
10Sec/15Sec/20Sec/25Se
c
User Manual
The selection will be used as the default print
mode.
The selection will be used as the default Lead
Gain. "Smart" means that the system will adjust
the lead gain automatic to fit the height of paper
while printing. "Current" means that the system
will use the screen lead gain while printing.
The selection will be used as the default print time
length of step.
28
Remark