INSTALLATION
SYSTEM FOR ADJUSTINGTHE EXTERNALDOOR IN RELATION TO THE INTERNALFRAME
1) Adjustment to be performed when the external door is not "vertically" aligned with the internal frame
- loosen the 2 screws (V) on the internal frame corresponding to the slots
- if the external door is lower than the frame, push the internal frame to the left and tighten the screws
- if the external door is higher than the frame, pull the internal frame to the right and tighten the screws
V
V
2) Adjustment to be performed when the external door is not "horizontally" aligned with the internal frame (Fig. 1)
- Loosen the 4 screws (S) equipped with M5 nuts on the internal frame and adjust the external door's alignment
with the frame itself. When properly aligned, tighten the M5 nuts.
S
fig. 1
S
26