Flowserve ISC2 Serie Instrucciones De Instalación página 3

applications.
The purchaser/user must therefore assume the ultimate respon-
sibility for the proper selection, installation, operation and main-
tenance of Flowserve products. Because Flowserve Corporation
is continually improving and upgrading its product design, the
specifications, dimensions and information contained herein are
subject to change without notice.
1.1 Assembly Drawing
The assembly drawing is included in the shipping box with the
mechanical seal.
1.2 Brief Description
A mechanical seal is a device designed to seal a rotating shaft
against a stationary housing, e.g. a pump shaft against a pump
casing. The stationary components will consist of a seal ring
and (depending on the design) a spring-loaded element. The
spring-loaded element can be a spring or a bellows. The seal ring
is sealed against the housing with a secondary gasket, e.g. an
O-ring. The rotating components will consist of a seal ring and
(depending on the design) a spring-loaded element. The spring-
loaded element can be a spring or a bellows.
The seal ring is sealed against the shaft with a secondary gasket,
e.g. an O-ring.
A mechanical seal can be supplied as a pre-assembled cartridge
or in separate components. Assembly is done in accordance with
the assembly drawing.
A mechanical seal will run in the pumped product or external
source fluid.
flowserve.com
3