Activation Of The V-Live Function; Modification Of Audio Indication Threshold In Continuity Test; Default Configuration Of The Unit; Date Of Last Calibration Carried Out On Unit - Gossen MetraWatt Metraclip 72 Manual De Instrucciones

3.12.9 Activation of the V-Live function

Hold the HOLD key pressed and bring the rotary switch from
the OFF position to the V position.
The unit emits a double beep then the V and
flashes.
The selected configuration is memorised when the key is
released: the V symbol is then ON steady and the
flashes.
Proceed in the same way to suppress the V-Live function: the
symbol then goes OFF when the key is released.
3.12.10 Modification of audio indication threshold in
continuity test
Hold the Yellow key pressed and bring the rotary switch from
the OFF position to the position
The unit beeps, the Ω and
threshold value (40.0 by default) .
Adjustment is then possible from 1 Ω to 40 Ω by successive
pressings on the yellow key (short pressure: progression of
1 Ω by 1 Ω; press and hold: progression of 10 Ω by 10 Ω).
Once the value is chosen, actuate the rotary switch to
memorise.

3.12.11 Default configuration of the unit

Hold the Yellow key pressed and bring the rotary switch from
the OFF position to A position.
The unit emits a double beep then all the segments of the
digital display and the
The default configuration is memorised when the key is
released: the display no longer flashes and the
disappears.
The default configuration is:
- Audio identification threshold: 40 Ω
- Auto cut-off: with
- V-Live function: none

3.12.12 Date of last calibration carried out on unit

Hold the MIN/MAX key pressed and bring the rotary switch
from the OFF position to the V position.
The unit emits a beep, then the calibration date of the unit is
displayed in the form "week - year" (SS.AA) as long as the
MIN/MAX key is pressed.

3.12.13 Display of the internal software version

Hold the HOLD key pressed and bring the rotary switch from
the OFF position to the A position .
The unit beeps, the software version is displayed in the form
UX.XX for 2 seconds, then all the segments of the display
are shown as long as the HOLD key is pressed.

3.12.14 Showing of display segments

See § 03.12.13. It is usually possible for any key-switch
combination not described previously.
.
symbols go ON along with the
symbol flash.
39
symbol
symbol
symbol