Polaris 360 Manual Del Proprietário página 5

Install Eyeball Regulators
If the Universal Wall Fitting and Eyeball Regulators are successfully installed, SKIP to
Step 2. Otherwise, see Installing Other Pool Connections.
Installing Other Pool Connections
If the pool does not have a dedicated return line, the Polaris 360 connects to most common return lines using
special adapter kits available for purchase at a participating Polaris dealer.
For pools with plastic-pipe return lines (without pipe threads) that are cut off flush with the pool wall:
If pipe is 1" in diameter, use
1" Stub Pipe Connection Kit
(part #9-100-8002)
1" Return Line
1" Expansion
Connector
If pipe is 1-1/2" in diameter, use 1-1/2" Stub Pipe Connection Kit
(part #9-100-8003).
1-1/2" Return Line
1-1/2"
Expansion
Connector
For directional eyeball fittings that do not have a 1-1/2" threaded socket, request the Eyeball Adapter
Connection Kit (part #9-100-8005).
Wall Fitting
Adapter
These are the most common, but not all of the possible pool connections.
If the UWF and Eyeball Regulators still cannot be installed on the pool, contact your dealer or Customer Service
to determine which parts may be necessary.
Other Connections Requiring Special Fittings
If a spa is connected to the pool filtration equipment, obtain expansion regulators in addition to one of the kits
listed above. Contact your dealer or Customer Service to determine which parts may be necessary.
If pipe is 1-1/4" in diameter, order 1" Stub Pipe
Connection Kit (part #9-100-8002) and 1-1/4"
Sleeve Kit (part #8-841-00).
Retainer
Ring
Connector
Head
www.polarispool.com
1-1/4" Return Line
1-1/4" Sleeve
Not included with kit
Does current fitting
look like this?