Rohde & Schwarz NRT2 Manual De Instrucciones página 31

®
R&S NRT2
False triggers of the touch panel in the presence of static electricity
If an object (e.g. a human finger) that is charged with static electricity is brought in the
vicinity of the touch panel, this can result in false triggers.
This behavior is caused by the principle of operation of a PCAP (projected capacitive)
touch panel.
Hardkeys
See
●
ESC / Local
–
–
–
–
●
SCREENSHOT
Creates a screenshot of the current display.
●
1 TRIG / Delete
–
–
●
ENTER
Confirms entries in text fields and dialog boxes and to confirm selections in the
drop-down lists.
●
FREQ
Sets the carrier frequency of the applied signal to obtain the specific measurement
uncertainty.
●
Favorites
Displays a list of favorite measurements.
●
PRESET
Getting Started 1430.0573.02 ─ 02
Figure 5-1.
Changes to the next-higher menu hierarchy level.
Escapes from the entry mode in text boxes and drop-down lists.
Closes dialog boxes and menus without losing any entries that have been
made.
Switches from remote control mode (all controls disabled) to manual mode.
Enables and triggers single-shot measurements in the trace mode.
Deletes numbers or text in a field so that a new entry can be made.
Instrument Tour
Front Panel Tour
16