BLUE EMBER GRILLS FGQ65079 Manual Del Usario página 34

DURING THE ASSEMBLY PROCESS OF THE BASE ASSEMBLY STEP, THE CUSTOMER
!
ASSEMBLY. CUSTOMER SHOULD RELEASE THE TIE AND PASS THE HOSE THROUGH
THE GAP BETWEEN HEAT SHIELD AND FRONT PANEL BEFORE ASSEMBLING THE FIREBOX
WARNING
(BASE) TO THE CART (CABINET). NATURAL GAS (NG) HOSE MUST PASS THROUGH
HOSE/REGULATOR SHOULD ALSO DIRECTED THROUGH THE GAP TO THE CYLINDER
FIG.10
PROPANE
HOSE WITH
REGULATOR
PROPANE MODEL
CASTING ASSEMBLY
REGARDING IMPROPER ASSEMBLY OF HOSE
ON PROPANE AND NATURAL GAS FG/FGQ650 MODELS
NEEDS TO ENSURE THAT THE HOSE IS UNTIED FROM BURNER BEFORE FINAL
THE GAP AND THAT IS DIRECTED TO THE BOTTOM OF CABINET. PROPANE
UNDERNEATH THE HEAT SHIELD.
NATURAL GAS (NG)
HOSE WITH
ADAPTOR
Your barbeque will come equipped with one
or the other, a propane hose with regulator,
or NG hose with adaptor as shown. Hose
type depends on model purchased.
NOTE: THIS BARBEQUE IS NOT DUAL FUEL,
THE GAS TYPE AND HOSE ASSEMBLY
DEPENDS ON THE MODEL PURCHASED.
!
IMPORTANT
NG MODEL
34
IF HOSE IS TIED TO BURNER OR
BASE, FIRST REMOVE THE
TIE AND PACKAGING AND THEN
ASSEMBLE THE GRILL TO BASE
AS SHOWN