BLUE EMBER GRILLS FGQ65079 Manual Del Usario página 42

PROVIDING POWER TO YOUR BARBEQUE
Light Switch
Wires
Transformer
Box
Step 2
IMPORTANT: Assemble light
switch wires to Internal Transformer
box as shown.
Step 3
IMPORTANT: To provide power to the barbecue,
plug a grounded electrical cord into rear receptacle box as shown.
CAUTION: To ensure continued protection against risk of electric shock,
connect to properly earthed outlets only.
Step 1
Plug the factory supplied,
•
three prong plug for the
transformer into the
receptacle box at the back
of the unit.
Transformer
Cord
Plug electrical cord into properly grounded GFI
(Ground Fault Interrupt) receptacle.
If use of an extension cord is required, be sure that it is a
minimum 16 AWG, 3 wire well insulated cord, marked for
OUTDOOR USE ONLY and properly grounded.
42
Grounded
Electrical Cord
FIG.17