Faults, Causes And Remedies; Spare Parts - salmson FVO 204 Instrucciones De Instalación Y Funcionamiento

ENGLISH

10. FAULTS, CAUSES AND REMEDIES

Only allow faults to be remedied by qualified personnel!
Follow the safety instructions in Maintenance.
Fault
Pump does not start
Safety switches thrown
Pump has no power
If the fault can't be fixed, please contact your local specialist
or your nearest Salmson customer service location or repre-
sentative.

11. SPARE PARTS

Spare parts can be ordered from your local specialist and/or
via Salmson customer service.
To avoid queries and incorrect orders, always provide all of the
details on the name plate with every order.
We reserve the right to make technical changes !
Cause
No voltage
Rotor blocked
Cable rupture
Water in the motor chamber
Foreign bodies in the pump, winding protec-
tion contact triggered
Pump drawing up air because fluid level is too
low
Pressure pipe blocked
14
Remedy
Check the wires and fuses, or switch auto-
matic fuses in the distribution station back on
Clean the housing and impeller, if still blocked
replace the pump
Check the cable resistance. If necessary,
replace the cable. Only use genuine Salmson
special cable.
Contact customer service
Disconnect the system from the electricity
supply and secure it against being switched
on.
Lift the pump out of the sump.
Remove the objects.
Check the function/setting of the level control
Detach the pipe and clean it