Machine Transportation - Amano American Sanders EZ-Sand Manual Del Operador

English - EN
To transport the machine, follow this procedure:
1. Unplug machine from wall outlet and wrap cord.
2. Raise and lock the handle to the vertical and upright
position. To lock the handle, unhook the knurled
collar by raising and twisting it (See Figure 1), and
then allow it to slide into the black cast iron weight
(See Figure 1A).
3. Unlock the three levers that attach the black cast iron
weight to the base machine by lifting up.
4. Unplug the interconnect cord from the base machine.
Now the handle can be lifted separately and placed in
the cargo hold.
5. The base machine can be lifted by grasping both the
front lift handle and underneath the axle area (See
Figure 2).
WARNING:
The machine is heavy (67 lbs./34kg). The handle
weight is 35 lbs./16 kg. To avoid injury or damage
to the machine use a firm grip and proper lifting
technique. Get assistance if necessary.
6. Always transport the machine with sandpaper
attached to the drivers. Damage to the grip face will
occur if sandpaper is not in place during transport or
storage.
7. Secure machine to prevent movement in cargo area.

Machine Transportation

7
Section - A
Figure 1
Figure 1A
Figure 2