Dovre VIRTUS 50GA Instrucciones De Instalacion Y Uso página 58

High or low flame
Double-click the button to switch to low flame. LO
appears on the display
D OVRE
20
09-20021-378
09-20021-379
Double-click the button to switch to high flame. HI
appears on the display
Timer
ON / SETTING:
1. Hold down the [Timer] button until the Timer sym-
bol is displayed and the hour starts blinking.
2. Press
or to select the hour.
3. Press the [Timer] button to confirm. The minutes
start blinking
4. Press
or to select the minutes.
5. Confirm by pressing the [Timer] button or wait.
OFF:
Press the [Timer] button and the symbol and the
countdown time disappear.
NOTE: At the end of the countdown time, the
flame is switched off. The Timer works only in
Manual, Thermostatic, and Eco mode. The
maximum countdown time is 9 hours and 50
minutes.
Subject to change because of technical improvements
09-20021-380