Fitting; Fitting Mechanical Components - Festo ERMB Serie Instrucciones De Utilizacion

ERMB
5

Fitting

Fitting mechanical components

Do not modify the settings of screws and threaded pins if there is no request to
S
do this in these operating instructions.
Fit the motor onto the rotary module in
S
accordance with the assembly instruc
tions for the kit recommended in the cata
logue.
Fitting the product:
Note
External stops can cause the toothed belt to tear due to excessive forces.
S Use only the motor controller for braking the ERMB.
Position the ERMB so that all the operating parts are accessible.
S
Fasten the ERMB with 4 screws and
S
2 centring sleeves (diagonal) or with the
aid of kits to the threaded holes 1 or 8.
Fastening is possible on all six side sur
faces.
Festo ERMB 0802NH English
Fig. 3
Fig. 4
21