Installation Procedure; Step 1. Connecting Devices To Your Print Server - Belkin Wireless G Manual Del Usuario

Installation Procedure

Step 1. Connecting Devices to
1
2
Before you start, you should have:
3
• One computer with Windows 2000 SP4 or
above, or Windows XP SP1 or above
4
• One MFP or standard printer with a USB
port and an installation CD
• One Category 5 Ethernet cable
5
• One USB cable (not included—usually comes with printer)
6
1.
Unpack the Print-Server package and verify
that all the items listed are provided.
7
2.
Connect the Print Server to your network by attaching one
end of the network cable to the Print Server's network
8
port and the other to an available port on your router.
9
10
11
12
13
3.
Plug one end of the power adapter to the Print Server and the
14
other into an electrical outlet. The Print Server will perform
a Power-On Self-Test (POST ) after it is powered on. When
the Status LED light the Status LED light
15
16
17
your Print Server
goes off, the Print Server is ready. goes off, the Print Server is ready.
10