Operating Print Server & Using The Mfps; Share Print - Belkin Wireless G Manual Del Usuario

Operating Print Server & Using the MFPs
1
Operating Print Server & Using the MFPs
2
After you have followed the Installation Wizard to finish the printer
installation, the printer is now connected to your computer. You can
start sharing print, scan, card-reader, or fax functions provided by
3
the MFP.
4
Tip 1:
"Disconnect" to release the printer. Another user
5
cannot use the printer until it is released.
Tip 2:
6
setting. The Print Server will automatically release your
connection to the printer after a period of idle time that you
have assigned. This allows the printer to not be occupied too
7
long and other users to share the printer frequently. Refer to
the "All-In-One Print Manager" section for more information.
8
9
10
11
12
13

Share Print

14
The printer will be added to "Printers and Faxes" in Windows after
the printer is installed. When you have connected to the printer by
15
clicking "Connect" in the Belkin All-In-One Print Manager, the Print
Server will automatically create the connection between the printer
16
and your computer, and then you can print a document following the
same steps as usual.
17
If you have finished using the printer, click
We recommend that you enable the "Idle Timeout"
30