Auto Connect List - Belkin Wireless G Manual Del Usuario

All-In-One Print Manager
"My Favorite" List
" My Favorite"
List
All-In
-One
Print
Server/MFP
Information
Refresh
Connect
Disconnect
Delete
Auto Release
when idle
time is over
xx minutes
(5–255)

Auto Connect List

To let the system occupy the Print Server automatically when you
want to print a document, just like the behavior of using a traditional
print server, you can add the printer into your Auto Connect List. The
system will send the printing jobs to the printer when the Print Server
is idle and there is no connection.
The "My Favorite" list will show your favorite
Print Servers. You can find the Print Server's
information including its name, MAC ID, IP
address, and any connected devices.
The information listed here is the same as the Print
Server List. Refer to the "Print Server List" section
for more information.
Refreshes the Print Server List immediately.
Allows printer connection to your computer.
Disconnects the selected MFP.
Deletes the selected Print Server from the "My
Favorite" list.
To avoid occupying the printer for too long, you
can set up an idle-timeout setting. It is used
to disconnect the current connection after the
printer is idle for a specified period of time.
By default, there is no timeout setting. We
recommend that you enable an idle-timeout
setting after the printer and Print Server are
installed completely so that the printer resource
will not be occupied easily.
39 39
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17