5. FUSE REPLACEMENT
If the fuse is blown, the starter motor will not work until it is replaced.
1. Turn the engine switch to the OFF position.
2. Remove the four 6 mm cap nuts and the front cover.
6 mm CAP NUTS
3. Remove the fuse holder cover and replace the fuse.
Specified fuse: 5 A
CAUTION:
• If frequent fuse failure occurs, determine the cause and correct the
problem before attempting to operate the generator further.
• Never use a fuse with a different rating from that specified. Serious
damage to the electrical system or fire may result.
FRONT COVER
FUSE HOLDER COVER
51