Important Warning - Robot Coupe CL 60 Manual De Instruccion

WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to
misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will
help you get to know your appliance and enable you to use the equipment correctly. The operation manual should be kept within
easy access to all users for reference and should be read completely by all first time users of the machine.
• Carefully remove the equipment from the packa-
ging and take out all the boxes or packets containing
attachments or specific items.
• WARNING-some of the parts are very sharp e. g.
blade, plates ... etc.
INSTALLATION
• We recommend that you install your machine on a
stable solid base at a comfortable working height.
CONNECTION
• Always check that your power supply corresponds
to that indicated on the serial number plate and that
it is properly sized.
NOTICE : DRIVE SHAFT ROTATION
• Three phase motors may rotate
either direction.
• The required motor rotation is counterclockwise.
• Changing the motor rotation requires a qualified
electrician.
• See note on end of power cord.

IMPORTANT WARNING

UNPACKING
• Always wear cut-resistant gloves when handling
the cutting plates.
• Follow the various assembly procedures carefully
(see page 7) and make sure that all the attachments
are correctly positioned.
• Do not open the feed head until the motor has
come to a complete stop.
• Never tamper with or defeat the purpose of the
locking and safety systems.
• Never put a hand or nonfood object in the entry or
exit chutes.
• Do not overload the machine.
• Do not leave the machine running unattended.
• Always unplug your appliance before cleaning.
• Always clean the appliance and attachments at the
end of each use.
• Never place the motor unit in water.
HANDLING
ASSEMBLY PROCEDURES
USE
CLEANING
W A R N I N G
KEEP THESE INSTRUCTIONS
IN A SAFE PLACE
• For parts made of aluminum alloys, use cleaning
detergents suitable for aluminum.
• For plastic parts, do not use detergents that are too
alkaline (i.e., containing too much caustic soda or
ammonia...).
• Robot-Coupe can in no way be held responsible
for the user's failure to follow the basic rules of clea-
ning and maintenance.
MAINTENANCE
• Always unplug the appliance before servicing.
• Check the seals regularly and ensure that the safe-
ty devices are in good working order.
• It is particularly important to maintain and check
the attachments since certain products contain
corrosive agents e.g. citric acid.
• NOTICE : Never operate the appliance if the
power cord or plug has been damaged. If the
machine fails to operate as described in this
manual, or if the machine malfunctions in any way,
remove the machine from use and have it serviced.
Additionally, discard all food processed at the time
of the malfunction.
• Contact your local Authorized Service Agency if
something appears to be wrong.