Electrical Connections - GRE Mariposa Instrucciones De Montaje

The Mariposa mini-pool is not equipped with a specific and/or automatic filling system. Both the initial filling
and the subsequent additions can be carried out using a garden hose or similar.
Filling should be up to the level of approximately 50 cm.
During filling it is advisable to constantly check the minipool, immediately checking for any leaks or assembly
errors.
ATTENTION:
It is advisable to fill the pool with softened water and to perform the appropriate treatments to
prevent limescale from settling on the surfaces and on the accessories
Gre declines all responsibility for any damage caused by water leaking from the mini-pool during
the filling, adduction or use phases of the same.
The Mariposa mini-pool is equipped with a dedicated electrical transformer with a removable socket.
IMPORTANT: the transformer must always be positioned at a distance of at least 3.5
meters from the minipool.
The power supply must always be protected by a high sensitivity differential. 30 mA
ATTENTION:
Do not power the mini-pool before the basin is completely filled.
FILLING

ELECTRICAL CONNECTIONS

31