Publicidad
Idiomas disponibles
Idiomas disponibles
KEYLESS
CHUCK
(Fig.
7 and
7a)
The ddtltddver has a keyless chuck which allows you ]o bond lighten or loosen accessory
bits
without the use of a chuck k-_y.
1. Grasp and hold !he rear chuck collar wtih one hand (see Fig. 7),.
2. Rotate
the front el the chuck with your other hand, clookwfse to CLOSE
and
counterclockwise
to OPEN the chuck jaws (as viewed from the front of the chuck)
The front of lhe chuck also has embossed
"pointing
hands", Indicating
whtch direction to
rotate the front of the chuck lo GRIP (tighten) or RELEASE
(loosen)
the accessory bits in
lhe chuck jaws (see F3g. 7a)..
Fig. 7a
COUNTERCLOCKWISE
(open'release")
Z_ WARNING:
Do not hold the chuck body with one hand and use the power of the
drill / driver to tighten the chuck Jaws on the accessory blloThe chuck body could slip in
your hand, or your hand could slip and come In contact with the rotating accessory
bit.
This could cause an accident lresulttng In serious
personal Injury.
23 PLUS 1 ADJUSTABLE
TORQUE
CLUTCH
(Fig. 8, 8a and 8b)
Thls drill/driver ts equipped wflh an adjustable clutch that has 24 different lorque settings. These
torque settings allow you 1oefficiently perform various drilling and screw driving applications,.
To adjust the clutch, hold the handle of the dri)lldriver with one hand and with the other hand
turn lha clulch collar to the left or rlgtll, and line the desired sel!ing (number or symbo!) up to
the embossed arrow on the top of the ddll/driver's
motor housing (see Fig 8 and Be).
Fig. 6
CLOCKWISE
Fig
"U
U
_
'l\,t
!
fie decreasetQrque}
us"
J
(to tncto,..se torque)
18
Publicidad
