Publicidad
Idiomas disponibles
Idiomas disponibles
TOOL USE AND CARE SAFETY
Z_ WARNING:
BE SURE to read and understand
all Instructions
before
operating
this dri!lldrIver.
Failure to follow al! instructions
listed below may result
in electric shock, fire and/or
serious personal injury.
t. ALWAYS use clamps or other practical
ways to secure and support the workplece
to a stable platform.
Holding the work by hand or against your body ts unstable and
may feed to loss of control.
2 DO NOT force the tool Use the correct tool and accessory
bit for your appt_catlono
The correct tool and bit will do the job better and safer at the rate for which it is designed,,
3_ DO NOT use the tool if trigger switch does not turn it "On" or "Off".
Any tool that
cannot be controlled with the trigger switch is dangerous
and must be repaired°
4. REMOVE
the battery pack from the drill/driver
or place the forward/reverse
selector
switch with power lock.off
in the "Lock
Off" position
before making
any adjustments,
changing
accessories
or storing
the toot. Such preventive
safety measures
reduce the risk o! starling
the too{ accidenlaUy,,
5 STORE idle tools out of the reach of children
and other untrained
persons,,
Tools are dangerous
tn the hands of untrained
users,
6 ALWAYS remove
battery pack and store separately
when drill/driver
Is not being
used.
7 When battery
pack Is not In use, keep It away from other metal objects like:
paper clips, coins, keys, nails, screws, or other small metal objects
that can
make a connection
from one terminal
to the other. Shelling
the battery terminals
together may cause bums
to skin, sparks
or a fire,
8. MAINTAIN
tools with care. Keep cutting
tools such as twist drill bits sharp and
clean. Properly
maintained tools with sharp cutting edges are less likely to b_nd and are
easier to use and control
9 CHECK for mteatignment
or binding
of moving
parts, breakage
of parts, and any
olher condition that may affecl the tool's operatiom
It damaged,
have the fool serviced
bolero
using., Many accidents
are caused by poorfy maintained
tools
10. USE ONLY accessories
that are recommended
for this tool. Accessories
that may
be suitable
for one tool may become
hazardous
when used on another tool.,
Sea page 24 for accessories.
t t Keep the too! and its handle dry, clean and free from oil and grease. Always
use
a clean cloth when cleaning.
Never use brake fluids, gasoline,
petroleum-based
products,
or any strong solvents
to clean your tool. Fol!owtng Ibis lute will reduce
the risk of !ass of centre! and deterioration
o{ the plaslic enclosure
el the drill / driver,,
7-11-07
Publicidad
