Remote Control; Other Connections; Connecting Optional Equipment - Aiwa NSX-4000 Manual De Instrucciones

Ocultar thumbs Ver también para NSX-4000:
Tabla de contenido

Publicidad

REMOTE CONTROL
Inserting batteries
Detach the batterycoveron the rearofthe remotecontroland insert
two R6 (size AA) batteries. +
When to replace the batteries
The maximum operational distance of the remote control should be
approximately 5 meters (16 feet). When this distance decreases,
replace the batteries with new ones.
Do not mix different types of batteries, or old batteries with new
ones.
If you are not going to use the unit fora long period of time, remove
the batteries to prevent possible electrolyte leakage.
Hints for correct operation
The remote control may not operate correctlywhen:
the line of sight between the remote controland the unit'sremote
sensor is exposed to intense light, such as direct sunlight.
other remote controls are used nearby (television etc.).
OTHER CONNECTIONS
CONNECTING OPTIONAL EQUIPMENT+
H
You can listen to and record sounds from optional equipment
connected to this unit.
Use a cable with an RCA phono plug (not supplied) to connect
analog equipment (turntables, LD players without digital output
connectors, VCRs, etc.) for audio playback.
Connections
Connect the red plug to the R jack, and the white plug to the L jack
of the VIDEO/AUX jacks.
When connecting a turntable
Use an Aiwa turntable equipped with an equalizer amplifier.
CONNECTING A SUPER WOOFER
Connecting a super woofer increases the realism of low-frequency
sounds.
Connect a super woofer with a built-in amplifier (Aiwa TS-W5 etc.)
to the SUPER WOOFER terminal. +
Refer to the super woofer operating manual for details.
16

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Nsx-4000 cNsx-3900Cx-n4000Cx-n4000 cCx-n3900Cx-n3900 u ... Mostrar todo

Tabla de contenido