KTM 58612027050 Instrucciones Para El Montaje página 5

Fig. A
Scope of supply
1x top case supporting plate
1
4x flat head screw with hexagon socket M8x20 DIN 7991
2
4x nut with collar DIN 6927
3
2x tube end cap
4
5 1x auxiliary frame
2x inner reinforcing plate
6
4x AH screw M6x16 DIN 912
7
4x A6.4 washer DIN 125
8
1x rear crossbar
9
2x insertion angle
bk
2x flat head screw with hexagon socket M8x16 DIN 7991
bl
2
1
5
3
10
Mounting
- Remove the seat and rear fender.
- Remove the left and right silencer.
- Mount the auxiliary frame 5 with the two inner reinforcing plates 6,
using the four M6x16 AH screws 7 and four A 6.4 washers 8.
Warning: do not tighten the four AH screws until all components are scre-
wed together.
Loosen the screws (M6x10) on the lower rear (Fig. A) and lift the lower
rear.
4
9
3
11
4
6
8
7