Cramer 1400286 Manual De Instrucciones página 2

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
SPECIFICATIONS
Model
Voltage
Maximum chain speed
Guide bar length
Oil tank capacity
Toothed chain
Guide bar
Weight without battery
pack
Measured sound
pressure level
Measuered sound power
level
Guaranteed sound
power level
Vibration level
Battery
Charger
DESCRIPTION
See figure 1.
1.
Battery Compartment
2.
Main Handle
3.
Trigger Switch
4.
Lock-out Button
5.
Comands rod
6.
Harness
7.
Extension tube
8.
Collar
9.
Power Head Pole
10.
Saw Head
11.
Sprocket Cover
12.
Oil Cap
13.
Chain Tension Knob
14.
Saw Chain
15.
Guide Bar
16.
Scabbard
ASSEMBLY
UNPACKING
„ This product requires assembly.
English (Original instructions)
40PS
40V
8 m/s
200 mm
50 ml
91PJ033X/JL9D-1X33
080NDEA318/
M1430833-1041TL
3.3 kg
82 dB(A), k=3 dB(A)
93.8 dB(A), k=3 dB(A)
97 dB(A)
2
2
<2.5 m/s
, k=1.5 m/s
40V110 / 40V220
40C120 / 40C60
„ Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
„ Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
„ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
„ If any parts are damaged or missing, please contact
your authorised service center for assistance.
PACKING LIST
„ Handle Pole
„ Extension Tube
„ Saw Head
„ Scabbard
„ Harness
„ Operator's Manual
Before assembly, remove the battery from the tool.
Do not insert the battery until assembly is complete.
Failure to comply could result in accidental starting
and possible serious personal injury.
FITTING THE POLE SAW
See figure 2.
The saw head (10) can be mounted directly on comands
rod (5) so as to achieve the standard length.
„ Insert the commands rod (5) in the saw head (10).
„ Slide the collar (8) upwards and turn it clockwise
until it is completely tightened.
Periodically check the connections to ensure that
they are tightened securely.
EXTENSION OF POLE SAW
See figure 3.
The maximum reach can be achieved by fitting the
extension tube (7) between the commands rod (5) and
the saw head (10).
„ Slide the collars (8) up and rotate it clockwise until it
is completely tightened.
Periodically check the connections to ensure that
they are tightened securely.
1
WARNING
WARNING
WARNING

Publicidad

Tabla de contenido
loading

Tabla de contenido