Adjust Volume Level; Select A Preset Sound Effect; Super Bass Boost; Select Surround Sound - Soundstream H-200MDi Manual De Instrucciones

Note:
* The operating time of every step shouldn't be
longer than 15 seconds or it will return to the
original display.
* If there is a power failure or the power system is
turned off, the clock will lose its setting.
* When you press the CLOCK button, the clock time
is displayed. Wait for a few seconds until the
display returns to the original display.

Adjust volume level

During play, press the VOL+/- buttons to increase/
decrease the volume level.

Select a preset sound effect

During play, press the EQ button repeatedly to select:
[FLAT] , [Pop] , [Classic] , [Rock] , [Jazz]

Super Bass boost

Press the BASS button repeatedly to select the base
boost level.

Select Surround sound

Press SURROUND button to get surround sound.
Pressthis button again to cancel the effect.

Mute sound

During play, press the MUTE button to mute or restore
sound. Press this button again or VOLUME+ button to
cancel the effect.

Adjust brightness of display panel

Press the DIM button repeatedly to select different
levels of brightness for the display panel.

Play

Play a disc

Caution!
- Never look at the laser beam inside the unit.
- Risk of product damage! Never play discs with
accessories such as disc stabilizer rings or disc
treatment sheets.
- Never put any objects other than discs into the
disc compartment.
1 Press the DISC button to select the DISC source.
2 Use the K button to open the disc tray.
3 Place a disc onto the disc tray (with the printed
side up) and use the K button to close the disc tray.
4 The unit will read the disc and play it automatically.
- To stop play, press the L button.
- To pause or resume play, press the
- To skip to the previous/next title/chapter/track,
press the
H/G
button.
BF
buttons.
If play does not start automatically:
- Select a title/chapter/track and then press the
button.
BF
Use the disc menu
When you load a DVD/(S)VCD disc, a menu may be
displayed on the TV screen.
To access or exit the menu manually:

Press the MENU button.
For VCD with PlayBack Control (PBC) feature

(version 2.0 only):
With the PBC feature, you can play VCD interactively
according to the menu screen. During play, press the
MENU button to enable/disable PBC.
- When PBC is enabled, the menu screen is
displayed.
- When PBC is disabled, normal play is resumed.
Select an audio language
You can select an audio language on DVDs video.
During disc play, press the AUDIO button.

- The language options appear. If the selected
audio channels is unavailable, the default disc
audio channel is used.
Note:
For some DVDs, the language can only be changed
from the disc menu. Press the SETUP button to
access the menu.
Select a subtitle language
You can select a subtitle language on DVDs discs.
During play, press the SUBTITLE button.

Note:
For some DVDs, the language can only be changed
from the disc menu. Press the SETUP button to access
the menu.

Play iPad/iPhone/iPod

Note:
Keep the children away from top "PUSH" panel
operation to avoid his finger being stuck in the
panel gap.
1 Press to lift up the dock cover.
2 Press the DOCK button on remote control or
button on front panel to select the iPad/iPhone/
iPod source.
3 Place the iPad/iPhone/iPod in the dock.
9