Play Options; Picture View Options; Adjust Settings; Introduction - Soundstream H-200MDi Manual De Instrucciones

Select shuffle play options
During play, press the SHUFFLE button to select

the shuffle play mode.

Play options

Display play information
During play, press the OSD button repeatedly to

display play information.
Zoom in/out image
During video play, press the ZOOM button repeatedly
to zoom in/out the image.
- When the image is zoomed in, you can press
the , , , to pan through the image.
   
Program
For video discs/audio CDs:

1 During play or in stop mode, press the PROG
button to access the program menu.
2 Enter the tracks/chapters to add to the program.
3 Repeat step 2 until the program is completed.
4 Select [Start] , then press the
the program.
For MP3/WMA files:

1 During play or in stop mode, press the PROG
button until the file list is displayed.
2 Select a file, then press the PROG button to add
the file to the play list.
3 Repeat steps 2 until the program is complete.
4 Press the button to play the program.
BF
To delete a file from the [Program List] :

1 Press the MENU button until the play list is
displayed.
2 Select a file, then press the PROG button to delete
the file from the play list.
Change the audio channel
During play, press the AUDIO button repeatedly to

select an audio channel available on the disc:
- Left Mono
- Right Mono
- Stereo
- Mix Mono
Note: This feature is only available for VCD play.
Display menu
In play mode, press the TITLE button to go back to
the title menu during PBC playback.
Select a camera angle
During play, press ANGLE button repeatedly to select
a camera angle.
Note:
This feature is only available for DVDs recorded with
multiple camera angles.
button to play
BF

Picture view options

Preview pictures
1 During play, press the
- The thumbnails of 12 pictures are displayed.
2 Select one of the following:
- a picture
- the slide show option
- the menu option
- the next/previous page (if available)
3 Press the ENTER button to:
- play the selected picture
- start slide show of all pictures
- enter the menu where each remote key
function is explained
- turn to the next/previous page (if available)
Select a slide show play mode
During play, press the PROG buttons repeatedly

to select a slide-show play mode.
Rotate picture
During play, press the

picture anti-clockwise/clockwise.

Adjust settings

Introduction

This chapter describes how to use the SETUP menu.
Most settings and adjustments are required to be set
when you first use the system.
1 Press the SETUP button.
2 Press the ,
 
3 Press the ,
 
press the button.

4 Press the ,
 
press the ENTER button .
- To return to the previous menu, press the
button.
- To exit the menu, press the SETUP button.

General Setup Page

TV DISPLAY
The shape of the television or monitor may not match
the shape of the movie frame. To avoid distortion on
older televisions, you may need to change the way
in which the image is displayed. Televisions use a
4:3 aspect ratio; high-definition televisions use 16:9
aspect ratio (as do movies).
Note:
You may need to read your television's manual in
conjunction with this section in order to achieve the
best results. Some discs do not allow the aspect ratio
to be changed and you will therefore have to change
the aspect ratio on the TV.
Make this setting while playback is stopped; you cannot
do this while playing back a disc.
11
button.
L
/ buttons to rotate the
 
buttons to select a setup page .
buttons to select an option and then
buttons to select a setting and then
