Other Features; Set The Clock; Set The Alarm Timer; Set The Sleep Timer - Soundstream H-200MDi Manual De Instrucciones

Other features

Set the Clock

In standby mode, press and hold CLOCK button to
activate clock setup
-
Hour digits begin to blink
Use / button to set hour, then press CLOCK
 
again.
- Minute digits begin to blink
Use / button to set minute then press CLOCK
 
to confirm clock settings.
Note:
You can synchronize this unit's clock with RDS station
and iPad/iPhone/iPod.
In standby mode, press and hold SETUP button.
"CLOCK SYNC MENU" scrolls on VFD, followed by a
sync mode for selection
Use / to select a clock synchronization mode and
 
ENTER to confirm selection
RDS:
sync clock with tuned RDS station automatically(if
RDS signal include time data)
iPod:
sync clock with connected iPad/iPhone/iPhone
automatically
OFF:
Use default clock setting.

Set the alarm timer

In standby mode, you can use the daily timer setting
to turn the unit on automatically at a certain time
everyday under standby mode. However the clock
must be set correctly for the timer function to work.
1 In standby mode, press and hold the TIMER
button, hour indicator will blink.
2 Set the hour with the
3 Press the ENTER or TIMER button, minute indicator
will blink.
4 Set the minute with the
5 Press the ENTER or TIMER button or ENTER
button, the selected time is set.
6 Set the daily timer to "ON" (daily timer set is in
effect) or "OFF" (daily timer set is to cancel) with
the button or button.
 
Note:
* The operating time of every step shouldn't be
longer than 15 seconds or it will return to time
display.
* The sound source of the "timer on" mode is the
same as the sound source when the unit was turned
off by the standby switch.
button or button.
 
button or button.
 
To confirm the daily time

Press the TIMER button in standby mode, the
daily time is displayed. Wait for a second until the
display returns to the time display.
To cancel the daily timer setting

In standby mode, repeatedly press the TIMER
button until the "ON" will display, then you can set
the daily timer to "OFF" by pressing the
or button (the daily timer will be cancelled).

Turning off the system also cancels the daily timer.

Set the sleep timer

Use the sleep timer to turn the system off after a
certain number of minutes when in play mode. By
setting the sleep timer, you can fall asleep to music
and know that your system will turn off by it self rather
than play all night.
1 Play a disc or tune in to the desired station.
2 To set the sleep timer by press the SLEEP button
repeatedly, it changes the number of minutes
shown on the display in this sequence:
After setting the number of minutes for the sleep
timer, the display will return to the display as
before setting the sleep timer.
The system is now set to turn off after the number
of minutes you set.
To confirm the sleep time

When the SLEEP button is pressed once, the
remaining sleep time is displayed. Wait for a
second until the display returns to the original
display.
To cancel the sleep timer setting

Repeatedly press the SLEEP button until the "00"
is displayed.
Turning off the system also cancels the sleep
timer.
15
button
