Switching The Dispensing Button Lighting On/Off; Switching The Heating Function On/Off; Switching The Cooling Function On/Off; On/Off Switch - Siemens pureFlow DW03500 Serie Instrucciones De Empleo

Switching the dispensing button lighting
ON/OFF
The dispensing button
switched off to save energy.
Press and hold the selection buttons
■
water) and (Hot water) simultaneously for at
least 3 seconds to switch into SET mode.
One of the hot water LEDs briefly lights up and a
signal tone is emitted.
Now press the push-button
■
Child protection LED (25a)
LED does not light
LED lights up
To save the setting, press and hold the selection
■
button (Room temperature) for at least three
seconds.
All LEDs light up two-times. The setting has been
saved.

Switching the heating function On/Off

To save energy, the heating function can be
switched off if it is not used.
LED Hot water
Heating function switched off
(energy-saving)
Heating function switched on
illumination can also be
(Cold
(child protection).
Dispensing but-
ton illumination is
switched off
(energy-saving)
Dispensing but-
ton illumination is
switched on
en
To switch off, press and hold the selection but-
■
ton (Hot water) for approx. 3 seconds.
The LED indicator "Hot water" goes out.
To switch it on again, press and hold the selec-
■
tion button (Hot water) for approx. 3 seconds.

Switching the cooling function On/Off

The cold water function can also be switched off to
save energy.
LED Cold water
To switch off, press and hold the selection but-
■
ton (Cold water) for approx. 3 seconds.
The LED indicator "Cold water" goes out.
To switch it on again, press and hold the
■
selection button
3 seconds.

On/Off switch

If the appliance is not to be used for an extended
period of time (vacation), the On/Off switch (14)
should be switched off to save energy.
Cooling function switched off
(energy-saving)
Cooling function switched on
(Cold water) for approx.
37