Care And Cleaning; Draining And Cleaning The Water Tanks - Siemens pureFlow DW03500 Serie Instrucciones De Empleo

Care and cleaning

Risk of electric shock!
– Before cleaning, disconnect the plug from the
power supply.
– Never immerse the appliance in water.
– Do not use a steam cleaner.
– Do not use abrasive cleaning materials.
– Do not spray water or use benzene for cleaning
purposes.
– Wipe off the housing with a moist cloth.
– Remove the collection tray (26) with drip grate,
then empty and rinse it. The collection tray with
drip grate can also be cleaned in a dishwasher.

Draining and cleaning the water tanks

The inside of the ambient water tank can be
cleaned. For hygienic reasons, only use a fresh
cleaning cloth (29) to wipe the inside clean. It has
been sterile-packed and does not leave any residues
during cleaning.
Empty the tanks as described in Chapter "Drain-
■
ing the water tanks" up to the point "release the
hot water from the tank into the basin prepared
for this purpose".
Remove the appliance cover (15), water tank
■
cover (15a) and the intermediate cover (15b).
38
en
Wipe the inside of the water tank clean with a
■
fresh cleaning cloth (29). Do not use any chemi-
cal agent or any other cleaning materials.
15
Reinstall the intermediate cover (15b), water
■
tank cover (15a) and the appliance cover (15).
27a
27b
27
15a
15b
28