Programming The Rts Transmitter; Checking The Rotation Direction - SOMFY Sonesse 50 RTS Guia De Instalacion

4. WIRING
1) Cut off the mains power supply.
2) Connect the motor according to the information in
the table below:
RANGE
230V-50Hz
220V-60Hz
120V-60Hz
100V - 50/60Hz
5. COMMISSIONING

5.1. Programming the RTS transmitter

1) Switch on the power supply.
2) Press the UP and DOWN buttons simultaneously
on the RTS transmitter: the shade jogs (moves up and
down briefly) and the transmitter is preprogrammed in
the motor

5.2. Checking the rotation direction

1) Press the RTS transmitter UP button:
a) If the shade is raised (a), the rotation direction is
correct: move to the section entitled «Adjusting the end
limits».
b) If the shade is lowered (b), the rotation direction is
incorrect: move to the next step.
2) Press the RTS transmitter MY button until the shade
jogs: the rotation direction has been modified.
3) Press the RTS transmitter UP button to check the
rotation direction.
6
Neutral Live
Blue Brown
White Black
Earth
1
2
3
Yellow/
Green
3 x 1,5 mm
Green
1
1
2
© 2013 Somfy SAS. All rights reserved. 12/2013
2
3 x 0.75 mm
2
a
=
b
=
3
2