Control Panel - Mx Onda MX-PI2612 Manual De Usuario E Instalacion

Container detection
The hob has a minimum detection limit of the cooking zone that varies for each
cooking zone. For this reason, you should refrain from using containers whose
base is less than the specified diameter.
If you turn on the hob without any cookware, with a cookware with a lower base
than specified or with a cooktop not suitable for induction, the cooktop will not
work, the display will show "
Container dimensions
The cooking zones have a minimum and maximum operating diameter, and are
automatically adapted to the diameter of the pan. However, the bottom of the
pan must have a minimum diameter according to the corresponding cooking
zone. To get the best efficiency from your induction hob, place the base of the
pan in the center of the cooking zone.
Cooking diameter of the large cooking zone: 80 ~ 180 mm Ø
Cooking diameter of the small cooking zone: 80 ~ 160 mm Ø
CONTROLS AND ELEMENTS
1. Large cooking zone
Cooking diameter: 80 ~ 180 mm Ø
Power: 1500W (2000W turbo mode)
2. Small cooking zone
Cooking diameter: 80 ~ 160 mm Ø
Power: 1400W (1800W turbo mode)
3. Glass plate

4. Control panel

CONTROL PANEL
1. Power on and off
2. Selection of the cooking zone
3. Power level selector
4. Control panel lock
5. Timer
6. Momentary stop "pause"
7. Power level indicators
".
7
9
2 6 3 4 2
5 1
1
3
2
4
7