Control Panel Lock - Mx Onda MX-PIP2199 Manual De Instrucciones

3. Touch with your fingertip on the touch button 14 ( ) or 15 ( ) to increase
or decrease the time in steps of 5 minutes respectively. The display 13
shows the time in minutes.
4. Once the time selected display 13 alternately show the power or selected
temperature and the remaining time for automatic shutdown. The timer
mode LED indicator 18 will remain lit to alert you that the timer is activated.
5. At any time during cooking you can increase or decrease the power or
temperature, using the buttons 14 ( ) or 15 ( ).
6. To cancel the timer touch with fingertip touch button 12 ( ) and then
choose a mode and a power level or temperature.
Note:
If activating the timer and when the display shows the time " 0 " if within 5
seconds to select the time for shutdown, timer mode is automatically
deactivated.

CONTROL PANEL LOCK

The induction plate incorporates a locking device that disables operation of the
buttons function selection ( ) and buttons to increase ( ) and decrease ( )
power / temperature, both cooking zones to time.
When the control panel is locked, you can turn the board to unlock it but you
can not operate the cooking zones.
If the induction hotplate is in operation, by blocking the control panel is
prevented by mistake, carelessness or error on the power or the selected
temperature is varied.
Lock control panel affects both cooking zones to lock the control panel you
have to play both the two touch buttons jump MAX and MIN, area left cooking
10 (MAX) and 11 (MIN) or right cooking zone 14 (MAX) and 15 (MIN) when the
control panel is locked both screens 4 and 13 show the display " LOC ".
To unlock the control panel with the plate lit touch at a time and for 2 seconds
the two touch buttons jump MAX and MIN, area left cooking 10 (MAX) and 11
(MIN) or the cooking zone right 14 (MAX) and 15 (MIN) when the control panel
is unlocked indication " LOC " disappears from the two screens.
12