Requirements For Product Use - Festo EGC-TB-KF Instrucciones De Utilizacion

EGC-TB-KF, EGC-HD-TB
4

Requirements for product use

Warning
Unexpectedly fast moving masses can harm people or property items (crushing).
• Apply power to the drive motor, at first limited to low speeds and torques.
Note
Malfunctions will occur if the device is not used correctly.
• Make sure that the specifications contained in this chapter are adhered to at all
times.
• Take into consideration the legal regulations applicable for the destination, as well as:
– regulations and standards
– regulations of the testing organizations and insurers
– national specifications.
• Note the warnings and instructions on the product and in the relevant operating instructions.
• Remove all transport packaging, such as foils, caps and cardboard.
The material used in the packaging is intended for recycling
(exception: oil paper = residual waste).
• Observe the local regulations for environmentally friendly waste management of electronic compon-
ents.
• Take into account the material specifications (
• Use the product in its original status, without any unauthorised modification.
• Take into consideration the environmental conditions at the location of use.
Corrosive environments reduce the service life of the product (e.g. ozone).
• Compare the limit values in these operating instructions with those of your application (e.g. forces,
torques, temperatures, masses, speeds).
Only if the load limits are observed is it possible to operate the product in compliance with the rel-
evant safety regulations.
• Take the tolerance of the tightening torques into account. Unless otherwise specified,
the tolerance is ±20 %.
24
Technical data chapter).
Festo – EGC-TB-KF, EGC-HD-TB – 1112a English