User Menu - Stryker Flosteady Manual Del Usuario

User Menu

EN
Control elements and display/function
fields to configure user menu
24
7 User Menu
Device parameters are changed and displayed with the user menu.
Back
without
save
1. Turn the device on as described in chapter 5.3 Turning the Device On, page 15.
2. Wait until the device check has finished.
3. Press the (MENU) key. The touch panel depicts User Menu, the software ver-
sion, and the corresponding function fields used for navigation. Press the
function fields »/º to toggle between user menu and service menu. The ser-
vice menu is protected from unauthorized access with a numeric code only
known to the service technician.
4. Confirm selecting User Menu by pressing the function field (Enter).
5. Press the function fields »/º to toggle between the menu items Language,
Volume, Wash Pressure Increase, Wash Time, Brightness, and Speed mode.
6. Confirm (select) the desired menu item by pressing the function field (enter).
7. Use the function fields »/º to select the desired setting within the menu
item.
8. Save the setting by pressing the function field (enter).
9. Exit the user menu by pressing the function field (exit). The function display
again shows Start pump.
The following chart provides an overview over the possible settings.
Select
Confirm/
Save
Load