Cleaning The Dome; Getting Repair Service Or Technical Assistance; Ordering Accessories And Replacement Parts; Table 3 Accessories - Federal Signal Commander 371-120 Manual De Instalación Y Mantenimiento

Installation and Maintenance Instructions
• The motor is equipped with sealed bearings and requires no
maintenance.
• The threaded dome ring joint should be well lubricated with
petroleum or a soap-thickened mineral oil. If corrosive products
have accumulated on joints and cannot readily be removed with
solvents, the parts should be discarded and replaced.

Cleaning the Dome

NOTE: Maintenance procedures sometimes require fixtures to be
hosed down for good housekeeping. The electrical circuit should
be turned off prior to hosing down the light.
Clean the dome periodically to maintain maximum light output.
Use only mild, non-abrasive cleaning agents.

Getting Repair Service or Technical Assistance

Products returned for repair require a Return Authorization form
from your local distributor or from Federal Signal. To obtain
repair service or technical assistance from Federal Signal, call
708-534-4756 or 877-289-3246. For instruction manuals and
information on related products, visit: http://www.federalsignal-
indust.com.

Ordering Accessories and Replacement Parts

Typical spare parts are listed in Table 4. To order accessories
and replacement parts, call Federal Signal Customer Support at
708-534-4756 or 877-289-3246.
Description
Wall Mount Bracket
Corner-Mount Bracket
Mounting Bracket, Surface
Kit, Shock Mount
Conduit Hub Kit, 3/4" NPT
Close-Up Plug, 1" NPT
16

Table 3 Accessories

Models 371-120 and 371L-120
Part Number
LWMB2
LCMB2
371BRCKT
K8459A076
K8459138
K8459130