WelchAllyn ProXenon 350 Instrucciones De Uso Y Manual De Servicio página 17

Directions for Use
4. Connect one end of the Composite or an S-Video cable (Y/C)
to the Video Processor and the other to your monitor or
digital recording device.
5. Remove the dust caps from the Luminaire, Camera, and the
Fiberoptic cable. Do not touch glass surfaces.
6. Insert Fiberoptic cable into Storz port of the ProXenon 350
Surgical Illuminator.
7 . Align the notch located on the Camera Cable Connector with
the key on the Video Processor before attempting to insert
the cable.
Caution Failure to align the notch on the Camera Cable
Connector with the key on the Video Processor may
result in damage to the pins of the Camera Head
Connector.
8. Insert the Camera Cable into the Connector of the Video
Processor.
Camera
Head
Connector
9. Thread the Camera Cable Connector clockwise until secured.
Chapter 2 Assembly and Operation 13
Camera Cable
Connector