Machine Specifications; Delivery Scope; Intended Use; Ce Declaration Of Conformity - Amann Girrbach Ceramill motion Modo De Empleo

4

Machine Specifications

4.1

Delivery Scope

_ Ceramill Motion milling machine
_ Mains cable
_ USB cable (5 m)
_ Network cable (5 m)
_ Control cable, extraction
_ Compressed-air hoses (250 mm and 2000 mm)
_ Service unit
_ Service set for Jäger spindle
_ Ceramill-Match-Package
▪ Ceramill Match CD (Ceramill Match and
Ceramill Motion operating software, installa-
tion instructions)
▪ Ceramill-Match-Dongle
▪ User Manual
_ Blank template, ZI71 Motion
_ Ceramill TEST 71 L (test blank)
_ Ceramill Motion Roto 2.5 (milling tool)
_ Screw set
_ Blank holder
_ Extractor adapter
The Ceramill Motion is delivered with a Ceramill
TEST 71L test blank (Order No. 760301) inserted in
the blank holder. Prior to delivery, a test object
was factory-milled in order to check the zero point
settings. Possibly remaining milled shavings/chips
are not a reason for rejection. The test blank is
provided for test milling and calibration of the
Ceramill Motion.
▷ After unpacking, check the machine for com-
pleteness and possible transport damages.
Please claim any transport damages immedi-
ately with your supplier (compare with Ceramill
Mall setup checklist).
M A C H I N E S P E C I F I C A T I O N S
4.2

Intended Use

The Ceramill Motion is a PC-controlled milling
machine for producing dentures by milling blanks
of pre-sintered zirconium oxide, plastics and wax.
Using blanks and milling tools not approved by
AmannGirrbach can damage the machine and
make the milling product unusable. For such
cases, AmannGirrbach shall assume no liability
whatsoever.
Unauthorised modifications/alterations of the
machine shall also void the warranty.
4.3

CE Declaration of Conformity

In terms of design and performance, this product
complies with the European Directives and the
supplementary national requirements. Conform-
ity has been confirmed with the CE marking.
The product's Declaration of Conformity can be
viewed under www.amanngirrbach.com.
E N
27