Function Of The Buttons; Reference Run; Program Execution - Amann Girrbach Ceramill motion Modo De Empleo

A P P L I C A T I O N A N D O P E R A T I O N
6.2

Function of the buttons

E N
Fig. 10
Button
Operation
button [A]
Service but-
ton [B]
Tab. 3
Instead of with the buttons, these func-
tions can also be actuated via the software
(see instructions of the Ceramill Motion
Software).
6.3

Reference Run

After switching on, a reference run must be car-
ried out to determine the mechanical zero points.
Operation button [A] flashes.
To start the reference run:
▷ Briefly push operation button [A].
The reference run is started. Operation button
[A] flashes.
36
A B
Buttons
Door shut
Starts or stops the
reference run;
starts or stops the
current program;
activates the con-
trol position
activates the serv-
ice position; acti-
vates the tool-
changing position
The reference run can be stopped:
▷ Briefly push operation button [A].
The reference run is stopped. Operation button
[A] flashes.
To continue the reference run:
▷ Briefly push operation button [A].
The reference run is continued at the position
where it was stopped. Operation button [A]
flashes.
On completion of the reference run, the machine
Door open
returns to the starting position. Operation button
Activates the
[A] goes out.
extraction
6.4
Before executing a program, it must first be
loaded (see Ceramill Match Software). A loaded
program is indicated by the lit operation button.
Activates the
▷ Briefly push operation button [A].
sealing air
The program is started. Operation button [A]
lights up.
The program can be stopped:
▷ Briefly push operation button [A].
-or-
▷ Open the door.
The program is stopped. Operation button [A]
flashes.
To continue the program:
▷ Briefly push operation button [A].
-or-
▷ Shut the door and briefly push operation button
[A].
The program is continued at the position where
it was stopped. Operation button [A] lights up.
On completion of the program, the machine
returns to the starting position. Operation button
[A] goes out.

Program Execution