Symbols - GreenWorks Pro GPW 2300 Manual Del Operador

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and
safer.
SYMBOLS DESIGNATION
V Volts
A Amperes
Hz Hertz
W Watts
no No Load Speed
Alternating Current
/min Per Minute
Class II Construction
Safety Alert
Read The Operator's Manual
Eye Protection
Wet Conditions Alert
Risk of Injection
Kickback
Electric Shock
Chemical Burns
Risk of Explosion
EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Rational speed, at no load
Type of current
Revolutions, strokes, surface speed, orbits, etc.,
per minute
Double-insulated construction.
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and
understand operator's manual before using this
product.
Always wear eye protection with side shields
marked to comply with ANSI Z87.1.
Do not expose to rain or use in damp locations.
To reduce the risk of injection or injury, never
direct a water system toward people or pets or
place any body part in the stream. Leaking hoses
and fittings are also capable of causing injection
injury. Do not hold hoses or fittings.
To reduce the risk of injury from kickback, hold the
spray wand securely with both hands when the
machine is on.
Failure to use in dry conditions and to observe
safe practices can result in electric shock.
To reduce the risk of injury or damage, DO
NOT USE ACIDS, ALKALINES, BLEACHES,
SOLVENTS, FLAMMABLE MATERIAL, OR
INDUSTRIAL GRADE SOLUTIONS in this product.
Do not spray flammable liquids. Flammable liquids,
fuel, and their vapors are explosive and can cause
severe burns or death.
6 6