Craftsman Laser Trac Manual Del Operador página 4

z_WARNING:
BE SURE to read and understand all Instructions In this manual t
before using this circular saw. Failure to follow all Instructions may result In t
hazardous radiation exposure, electric shock, fire and/or serious personal Injury, !
SAFETY PRECAUTIONS FOR LASERS
This saw has a built-in laser light.The laser is a Class Ilia and emits outputpower of a
maximum 2.5mW and 635-665nmwavelengths. These lasersdo not normallypresent
an opticalhazard.However,DO NOT stareat the beam as this cancause flash
blindness,
CAUTION:The following label Is on your saw.
It Indicates where the saw emits the laser light,
BE AWARE of the laser light location when using,
ALWAYS MAKE SURE that any bystanders In the
vlclnlty of use are made aware of the dangers of
looking directly Into the laser.
2t Cf'R _ 1040,10 _¢4 1 _10,t_t
A_tD [KPOSU_1_
_WARNING:
LASER LIGHT. LASER RADIATION.Avoid Dlrect Eye Exposure.
DO NOT stare Into beam. Only turn laser beam on when the sew Is on the
workplece. Class Ilia laser.
z_WARNING:
Use of controls, adjustments or performanceof procedures ]
other than those speclfled in this manual may result In hazardous radiation
f
exposure.
I WARNING:
The use of
optical
instruments such as, but not limited to, ]
telescopes or transits to view the laser beam will Increase eye hazard.
!
t_ DO NOT remove or deface any product labels. Removing product labels
Increases the risk of exposure to laser radlatlon,
2. The laser beam can be harmful to the eyes, ALWAYSavoiddirect eye exposure.
DO NOT look directly Into the laser beam output aperture during operation_ DO NOT
project the laser beam directly Into the eyes of others,Turn laser on ONLY when
making cuts.
3. The laser on the saw is not a toy.ALWAYS keep out of the reach of children,
The laser light emitted from this devlca SHOULD NEVER be directed towards any
personfor any reason.
4. BE SURE the laser beam is aimed at a workptece (such as wood or rough coated
surfaces) that does not have a reflective surface.
5. DO NOT use on surfaces such as sheet steel that have a shiny, reflective surface.
The shiny surface could reflect the beam back at the operator°Be aware that laser
light reflected off of a mirror or any other reflective surfaces can also be dangerous.
6. ALWAYSturn the laser beam off when not in use. Leaving the toolon Increases the
risk of someone inadvertently staring Into the laser's beam°
_CAUTION'
ALWAYSfollow only the Instructions contained In this manua-(_
when using this laser, Use of this feature In any manner other than what appears
In this manual may result In a hazardous radiation exposure,
7. DO NOT attemptto modify the performance of this laser device in any way.Thls may
resultin a dangerousexposure to laser radiation.