EN
SWEEPER 700 EH - 700 SH - 900 EH - 900 SH
NOTE:
The technical specifications of the engine are given in the specific manual.
1-1.4 REPLACEMENT OF PARTS
In the replacement of parts use only GENUINE PARTS, tested and authorized by the MANUFACTURER.
Do not wait until the components are worn out through use. Replacing a component at an opportune moment
means a better functioning machine and also a saving due to the fact that major damage has been avoided.
1-1.5 TECHNICAL ASSISTANCE
The manufacturer puts Its Technical Assistance Service at the disposition of the customer to resolve any problem
related to the use or maintenance of the machine.
1-1.6 REQUESTS FOR ASSISTANCE
Any such requests should be made after a close analysis of the problems and their causes.
When making written requests please specify the following information:
- Machine model
- Registration number
- Details of problems encountered
- Checks made
- Adjustments made and their effect
- Any other information that might be useful
Send your requests to:
DULEVO INTERNATIONAL S.p.A.
Via Giovannino Guareschi, 1
43012 FONTANELLATO
(PARMA) ITALY
Tel. +39 0521 - 82 77 11
Fax. +39 0521 - 82 77 95
or to the "AUTHORIZED ASSISTANCE NETWORK"
The manufacturer reserves the right to carry out modifications to the machine for technical or commercial reasons,
without obligation to update the instruction manual and spare parts catalogue at that time.
1-1.7 UTILIZATION FIELD
The machine, composed of a brush and a suction sistem, is to be used EXCLUSIVELY to clean dry surfaces.
Anyother use could be cause of damage to people or things and is therefore PROHIBITED.
¨
2008-02
29