SWEEPER 700 EH - 700 SH - 900 EH - 900 SH
For this purpose, the filter is removed as follows:
- Remove the rear bin.
- Loosen the two lock handles (1) and rotate the related nuts (2)
- Remove the filter (3) while holding up the filter shaker rod (4).
- To remount the filter, carry out the operation in reverse order.
WARNING:
The filter features an arrow that shows you the direction in which it should be fitted.
WARNING:
If you are using the machine in a particularly dusty environment (cement factories, sawmills, marble
processing factories), it is wise to use the filter shaker more frequently.
REPLACING
Every 200 hours of work, the filter must be replaced.
After the filter has been remounted, make sure the gasket and filter are dust tight.
1
3
¨
2
2
2008-02
4
EN
1
FIG. 11-1.2
41