Construction And Functions; Construction; Functional Description; Transport, Packaging And Storage - Heiniger Xplorer Traducción Del Manual Original

5 Construction and functions

5.1 Construction

1 Clipping blade
2 Clipping head
3 Lubrication opening
4 Clipping pressure adjustment
5 Motor unit
5
6 ON/OFF switch
7 Battery latch
4
8 Cord
3
2
1
Abb. 1

5.2 Functional description

The clipper is used for clipping cattle and horses.
1
Two comb-like blades serve as cutting tools. The
lower blade (2), which is closest to the animal's
skin, is fixed and attached to the housing. The
upper blade (3) moves back and forth against the
lower blade. The upper blade is set in motion with
the help of a swivelling lever. The clipping pressure
between the blades is adjusted via the adjustable
head (1).
2 3
Abb. 2
32
8
7
6
Cattle and Horse Clipper

6 Transport, packaging and storage

6.1 Box contents

1 Clipper
1 pair of clipping blades
1 charger
1 backup battery (depending on device)
1 power pack with plug
1 special screwdriver
1 bottle of special lubricating oil
1 cleaning brush
1 case for transport and storage
1 operating instructions
NOTE
►
Check to ensure the completeness of the contents and that there is no damage. Ple-
ase report incomplete package contents or any apparent damage immediately to your
supplier/dealer.

6.2 Packaging

Only environmentally friendly materials are used for packaging.
The return of the packaging saves raw materials and reduces the volume
of waste. Dispose of packaging materials that are no longer needed in
accordance with locally applicable regulations.

6.3 Storage

Store the clipper and accessories under the following conditions:
• Do not store outside.
• Keep dry and dust-free.
• Protect from direct sunlight.
• Avoid mechanical shock and vibration.
• Storage temperature: 0 to 40 °C.
• If stored for longer than three months, check the general condition of all parts regularly.
• When not using the clipper, store it in the case making sure it is well cleaned, lubricated
and that the clipping elements are not spring loaded (risk of corrosion).
Cattle and Horse Clipper 33